This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.

PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats, and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need, and combines the functionality of the PX4FMU + PX4IO.

A new-generation u-blox GPS NEO-M10 module with low power consumption and high positioning accuracy. It supports GPS/QZSS L1 C/A, GLONASS L1OF, BeiDou B1, SBAS (WAAS, EGNOS, MSAS), and Galileo E1B/C, and features AssistNow GNSS support, an onboard compass, TCXO oscillator, and active anti-jamming technology.

The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

Note: Product image may vary from the actual product.

Specifications and Features:

Pixhawk V2.4.8 Flight board:

The advanced 32-bit ARM CortexM4 high-performance processors can run Nux RTOS real-time operating system.

14 PWM / servo output.

Bus interface (UART, I2C, SPI, CAN).

The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.

Provide automatic and manual modes.

Provide redundant power input and failover.

Multicolor LED lights.

Provide a multi-tone buzzer Interface.

Micro SD recording flight data.

Processor:

32bit STM32F427 Cortex M4 core with FPU.

168 MHz.

128 KB RAM.

2 MB Flash.

32-bit STM32F103 failsafe co-processor.

Sensors:

ST Micro L3GD20H 16 bit gyroscope.

ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.

Invensense MPU 6000 3-axis accelerometer/gyroscope.

MEAS MS5607 barometer.

Interfaces:

5x UART (serial ports), one high-power capable, 2x with HW flow control.

2x CAN (one with an internal 3.3V transceiver, one on expansion connector).

Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.

Futaba S.BUS® compatible input and output.

PPM sum signal input.

RSSI (PWM or voltage) input.

I2C.

SPI.

3.3 and 6.6V ADC inputs.

Internal micro USB port and external micro USB port extension.

PIXHAWK PPM Encoder Module:

Support the input channels: 8.

Output: PPM SUM × 1 / MUX × 1.

Glass Fiber Flight Controller Anti-vibration/Shock absorber Set:

Color: Black

Material: Glass-fiber

Suit for the different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4

M10 GPS Module:

GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1

SBAS L1 C/A: WAAS, EGNOS, MSAS

Galileo-ready E1B/C

Onboard Compass

Assistance AssistNow GNSS Online

AssistNow GNSS Offline (up to 35 days)

AssistNow Autonomous (up to 6 days)

OMA SUPL & 3GPP compliant

Oscillator TCXO

Crystal

RTC crystal Built-In

Noise figure On-chip LNA . Extra LNA for

lowest noise figure

Anti-jamming Active CW detection and removal. Extra

onboard SAW bandpass filter

Memory ROM or Flash

Supported antennas Active and passive

Odometer Travelled distance

Data-logger For position, velocity, and time

GPS Folding Base Antenna set:

Material: CNC Aluminum alloy, carbon glass fiber rod

Mounting rod diameter: 4mm

length of rod: 14 cm.

GPS plate diameter: 40 mm.

Base plate diameter: 35 mm

Mounting hole spacing: 16-35mm

Weight: 20g

Colour: Anodised black

Note: Adhesive Pad is not included.

APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0:

Max input voltage: 28V

Max current sensing: 90A

Voltage and current measurement configured for 5V ADC

Switching regulator outputs 5.3V and 3A max

6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector

Support 6S battery.